AS-P2410, AS--P2420
Specification:
12/24VDC 10-20A
Description
This PWM solar charge controller is typically a device for solar charge regulation and discharge output control, with LCD screen display and extra 5v USB, mainly used in small size solar DC power system.
■12/24V battery system auto recognition
■AGM, GEL, Flooded, and Lithium batteries supported
■3 Stage PWM Temperature Compensated Charging
■Multiple load control mode selection
■Automatic 30day Battery Equalization
■Built-in 5V 2A USB ports to charge USB devices
■LCD screen displaying system working status and setting parameters
■Extensive electronics protection
■Industrial grade design, for better function under extreme environment conditions
|
ITEM |
PARAMETERS |
|||
|
Model No. |
P2410 |
P2420 |
||
|
System Voltage |
12V/24V Auto(FLD/GEL/SLD), 12V/24V(manual set for Li) |
|||
|
No-load Loss |
8ma(12V)，12ma（24V） |
|||
|
Max PV Input Voltage |
< 55V |
|||
|
Rated Charge Current |
10A |
20A |
||
|
Max PV Input Power |
170W/12V；340W/24V 340W/12V；680W/24V |
|||
|
Battery Type Selection |
FLD |
SEL |
GEL |
LI |
|
Equalize Charge Voltage |
14.8V*n |
14.6V*n |
-- |
-- |
|
Boost Charge Voltage |
14.6V*n |
14.4V*n |
14.2V*n |
14.4V*n (adjustable) |
|
Float Charge Voltage |
13.8V*n |
-- |
||
|
Boost Charge Recovery Volt |
13.2V*n |
-- |
||
|
Over Discharge Recovery Voltage |
12.6V*n |
12.6V*n (auto adjust to the over discharge voltage) |
||
|
Over Discharge Voltage |
11.1V*n |
11.1V*n (adjustable) |
||
|
Light Control Voltage |
5V（12Vsystem），10V(24Vsystem) |
|||
|
Light Control Delay Time |
10s |
|||
|
Load Modes |
light control(dusk-to-dawn), light + time control, debug mode, manual control, steady-on mode. |
|||
|
Operation Temperature |
-25℃ ～ +65℃ |
|||
|
IP Protection |
IP30 |
|||
|
Net Weight |
180g |
200g |
||
|
Communication |
NA |
|||
|
Display |
LCD |
|||
|
Operation Altitude |
≤ 3000M |
|||
|
Controller Size |
122*70*34.5mm |
|||
中文
Español
Português
Français
Deutsch
Italiano
العربية